PMC GHO 2:1
PMC Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals.
GHO 2:1 High Output Stainless Steel Transfer Pump for 55-Gallon Drums
|
Technical Specifications |
GHO |
|
Pressure Ratio |
2.2:1 |
|
Output (Cont. Duty) |
5.5 Gals/min (20.8 Liters/min) |
|
Output (Int. Duty) |
11 Gals/min (41.6 Liters/min) |
|
Heater WattageCycles per Gallon |
18.5 Cycles |
|
Cycles per Liter |
4.88 Cycles |
|
Stroke |
4″ (10.2 cm) |
|
Maximum Air Pressure |
120 psi (8.273 bar) |
|
Air Inlet |
1/4 NPT (F) |
|
Fluid Output |
3/4 NPT (F) |
|
Air Consumption |
2.0 cfm per gallon-pumped @ 100 psi 124.67 cc/sec per liter pumped @ 689 kpa |
|
Weight |
25 lbs (11.4 kg) |
|
GHO Length |
48.92”(1242.6 mm) Used w/55 gallon drums |
|
GHO-S Length |
45.03” (1143.8 mm) Used w/30 gallon drums |