5121 Winnetka Ave North, Suite 130, New Hope, MN 55428

763.208.2266 | 800.245.1391 | (FAX) 763.208.2366

Constant Pressure Dispensing System

Constant Pressure Dispensing System

The convenience of disposable foam kits meets the efficiency of bulk systems in the new CPDS™ Series 2 from Touch ’n Seal. The CPDS Series 2 is a portable, constant pressure spray foam dispensing system that dispenses Class I fire retardant, thermal insulating and sound attenuating 2-component polyurethane spray foam - up to 2-1/2 times as fast as foam kits. With minimal investment and training the CPDS Series 2 offers an ideal opportunity for business start-up or service expansion. And with less trash, less chemical waste, disposable cylinders, and no ozone depleting chemicals, means you can also feel good about your impact on the environment.

  • Ideal for business start-up or service expansion
  • High profit center, low maintenance
  • Eliminates the need for bulk systems in mid-sized projects, rehabs & renovations, repairs, room additions and "call backs"
  • Commonly available replacement parts
  • 2X faster foam delivery and up to 20% greater yield than disposable foam kits
  • Foam dispenses from cylinder bottom, resulting in virtually no chemical wast
  • Economical - lower cost per board foot than kits

The Touch 'n Seal CPDS Series 2 comes complete with, ready to use, just add the appropriate "A" & "B" chemical cylinder set.  The CPDS Series 2 comes with all necessary tool, an operational DVD, a 30' chemical delivery hose set, 2 spray foam applicators, 50 disposable spray nozzles and a set of operational and maintenance manuals.

The CPDS Series 2 is easily handled and transported by a single individual.  It is ideal fort those situations where a rig or bulk system is too much or disposable kits are too little.  Chemical cylinder sets are available for both 1.75 pcf and 1.00 pcf Class 1, Fire Retardant polyurethane spray foam.

 

Weight (empty) 155 lbs approx.
Height 49 inches
Depth 33 inches
Width 24.5 inches

Foam Delivery Rate @ 160 psi

Foam Delivery Rate @ 200 psi

 

4.0 lbs per minute

5.5 lbs per minute

 

 Maximum Hose Length  150 feet
 Power Source  120V, 15amp
 Alternate Power Sources  Pressurized Dry Nitrogren, Compressed Air
Foam Type

CP 660 FR, 2 Component, Fire Retardant, 2.0 PCF

CP 750 FR, 2 Component, Fire Retardant, 1.75 PCF

CP 1200 FR, 2 Component, Fire Retardant, 1.0 PCF

 

Click Here For Setup, Application and Troubleshooting Videos